Setting up as an Anynet+ (HDMI-CEC)-enabled device
1.
2.
Press the SOURCE button. The Source screen appears. Select a connected device, and then press the down directional button.
Select Anynet+
"" The menu options available in the
●● Anynet+ (HDMI-CEC)
Sets up the selected device as an Anynet+
Read before connecting an Anynet+ (HDMI-CEC)
"" Anynet+ cannot be used to control external devices that do not support
"" Anynet+ devices must be connected to the TV with an HDMI cable. Note that some HDMI cables may not support Anynet+
"" The TV remote control may not work under certain circumstances. If this occurs, select the Anynet+ device again.
"" Anynet+
"" Anynet+
"" To listen to
"" A home theatre system that has been connected to the TV with an HDMI cable and an optical cable only supports