Installation | Section 2 |
|
|
Configure Your Computers
For initial configuration, you need to initially configure the PC’s network setting to specify a static IP address for the computer that is going to communicate with the Ethernet Bridge.
After initial configuration:
If using DHCP Reconfigure the PC’s settings to Obtain an IP
address automatically.
If not using DHCP Continue to use the Static IP settings.
This section includes information on configuring computers with the following operating systems:
!Windows® 98SE
!Windows ME®
!Windows® 2000
!Windows XP™
Determine the operating system for each computer you will include in your wireless network and follow the steps to configure the network settings for that PC.
WE800G |
