Network Configuration
There are several ways or Network Interfaces that you can use to config- ure the hub. You must set up the hub using Local Console management to enable the other management capabilities:
•Mini Console (see Chapter 3)
•Local Console/Remote Telnet
•
•SNMP Management
The Network Configuration Menu allows setting up Ethernet and SLIP connections to the hub. Network Interface <1> is used to configure Ethernet connections and Network Interface <2> is used to configure SLIP connections.
Local Console/Remote
An Ethernet connection allows you to monitor and configure the hub with a Local Console via Telnet Session, a Web browser or SNMP management. You need to configure the IP Address and Subnet Mask to work with your LAN settings before you can make an Ethernet connection.
Master Hub Configuration & Console Management 69