Black Box LH8112A-S, LH8124A manual Connecting Ethernet Hubs or Devices, 20 10/100 Managed Hub

meters for 10Mbps connections. All ports are hot pluggable. It is recom- mended you label each cable to identify the device or port at each end.

					10/100 Managed Hub
13x	14x	15x	16x	17x	18x	19x	20x	21x	22x	23x	24x
MDI-II											MDI-II
Switch Module
Installed
1x	2x			5x	6x	7x	8x	9x	10x	11x	12x

Shared Ports Shared Ports

Connecting Devices

Connecting Workstations

Install either a 10BASE-T or a 100BASE-TX Fast Ethernet Network Interface Card into each workstation if not already installed. Using a UTP/STP cable, connect the Ethernet card (in the workstation) to a hub port.

Connecting Ethernet Hubs or Devices

Connect 10Mbps devices using UTP/STP Cat 3, 4 or 5 cables with RJ-45 connectors, enabling sending/receiving to or from other 10Mbps devices. By default, each port is set in auto sensing mode. The 10/100 Managed Hub can detect a 10BASE-T device and transmit/receive information to/from it.

10/100 Managed Hub

10Mbps

Connecting Ethernet Hubs

20 10/100 Managed Hub