Black Box LH8124A, LH8112A-S manual 58 10/100 Managed Hub, Cancelling the Password

word displays as four asterisks. The current digit blinks, indicating it can be configured.

1.Scroll to UNIT CONFIG and press <Enter>. You are prompted to enter the password, **** PSW appears in the message zone and the first “*” flashes. Press <Next> to increase the digit.

2.Unlock the control panel by entering the default password 0000, one digit at a time by pressing <Next> once and <Enter> once to progress to the next digit.

3.Repeat Step 2 three times. The control panel is unlocked.

4.Scroll to SET PASSWORD and press <Enter>.

5.Enter a new password and press Enter to exit the password configuration, SET PASSWORD displays in the message zone.

6.Press <Next> until MAIN MENU displays in the message zone and <Enter> to exit to the main menu.

K % 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 G-A
80	G-B
40	G-C
20
10	G-D
5	ID
3	Master
1	WWW
	SNMP
	O-O-B
	Password

Cancelling the Password

The password can be cancelled only by entering a new password or by setting each digit to “*”.

In Case You Forget Your Password

If you forget your password, use the Console Management program to read the password setting. See Chapter 4: “Connecting the Console Interface” and “User Authentication” for more information.

58 10/100 Managed Hub