![](/images/new-backgrounds/1193046/193046115x1.webp)
Section 3 | Configuration |
|
|
Field | Description |
Connection Mode | Select a connection mode. |
| The options are DHCP or Static Assigned. |
| If you select Static Assigned, you must enter |
| in the IP Address, Subnet Mask, and |
| Gateway IP information below. |
Connection Status | Provides current information about the |
| Ethernet connection status of the Wireless |
| Ethernet Bridge. |
IP Address | This is the IP address you use to connect to |
| the WE800G. If connecting to a DHCP |
| server, the IP address will appear here. If |
| using Static Assignment, enter the IP address |
| here. |
Subnet Mask | This is the Subnet Mask address you use to |
| connect to the unit. If connecting to a DHCP |
| server, the Subnet Mask address will appear |
| here. If using Static Assignment, enter the |
| Subnet Mask address here. |
Gateway IP | This is the Gateway IP address the device |
| will use to connect back to you. If connecting |
| to a DHCP server, the Gateway IP address |
| will appear here. If using Static Assignment, |
| enter the Gateway IP address here. |
Apply | Click to save your settings. |
Cancel | Click to cancel any changes. |
WE800G |