Section 1 | Overview |
|
|
LED Description
The underlined items represent network activity.
LED | Condition | Color | Status |
1. Power | ON | Green | The device is powered on and operating normally. |
| Blinking | Green | Firmware update is in progress. |
| Blinking/ON | Red | The power LED turns red as soon as the reset |
|
|
| button is depressed. |
|
|
| If the reset button is held down for more than five |
|
|
| seconds, the LED starts to blink, during which time |
|
|
| the WE800G’s default user name, password, and |
|
|
| IP address will be restored. The LED then turns off |
|
|
| until the reset button is released. |
|
|
| The power LED continuously blinks red if the |
|
|
| firmware is corrupted. The firmware needs to be |
|
|
| restored. |
2. Wireless | OFF | None | No mobile station or AP has associated with this |
|
|
| device. |
| ON | Red | The wireless interface has been disabled by the |
|
|
| firmware. |
| ON/Blinking | Green | Connection exists in this wireless domain/active |
|
|
| traffic present. |
3. Device | OFF | None | No external Ethernet device has been attached |
|
|
| and detected. The Ethernet link is down. |
| ON/Blinking | Amber | 10BaseT link detected/active traffic present. |
| ON/Blinking | Green | 100BaseT link detected/active traffic present. |
WE800G |
