AMX Wireless Touch Panels (Wave Server) Connectors, Multiple ViewPoints in an Installation

Connectors

All ViewPoints have two connectors, as shown in Figure 3. The power jack is for connecting an external 12 VDC power supply for ViewPoint operation and charging. The programming jack is a three-wire, 2.5 mm stereo jack. The required cable and power supply comes furnished with the ViewPoint.

Figure 3

ViewPoint connectors

Power jack

Programming jack

Stereo plug male

Male DB9

ViewPoint to PC programming cable

Cable FG10-517 to cable FG10- 727 to your PC's RS-232

Note

RF operating frequencies cannot be user-adjusted. Operating frequencies must be factory-set.

Multiple ViewPoints in an Installation

The ViewPoint transmits data via RF or IR. The VPT-CP and VPT-GS ViewPoint Wireless Touch Panels are shipped to operate on a standard frequency of 418 MHz RF and user-selectable 38 KHz or 455 KHz IR frequencies. The ViewPoints can be ordered for different RF operating frequencies that must be set when the unit is manufactured.

6 Installation ViewPoint Wireless Touch Panels l