AMX Wireless Touch Panels (Wave Server) instruction manual Battery Charging, Rear view

Note

When inserting or removing a battery, insert or remove the battery slowly to avoid false indications on the LEDs.

Figure 7

Rear view

Battery Charging

When a ViewPoint touch panel is not cradled on the docking station, an optional extra battery can be placed in the charging compartment. The optional battery is fully charged in four hours when the optional power supply is plugged-in to the rear of the docking station (Figure 7). The ViewPort Docking Station provides trickle- charging of the battery inside the ViewPoint when the ViewPoint is cradled in the ViewPort.

Power supply		Retaining ears
connector	Rear view	(tabs)

Status LEDs (Figure 6) are located on the bottom front of the docking station. There are three LEDs; yellow indicates a ViewPoint connection to the docking station; red shows a battery being charged in the charging compartment; green indicates that the battery in the charging compartment is fully charged.

ViewPoint Wireless Touch Panels Installation 11