AMX Wireless Touch Panels (Wave Server) Gray Scale and Programming Numbers, Sendcommand TP,WAKE

System Send_Commands (Cont.)

Command	Description
"'WAKE'"	Deactivate screen-saver mode and reset sleep timer.
	Example:
	SEND_COMMAND TP,"'WAKE'"
	Deactivates the touch panel screen-saver mode and resets the
	sleep timer.

"'XMTO <number>'"

"'XMRT <number>'"

Warning"'ZAP!'"

You should only use the ZAP! command to erase all the stored data in the touch panel. The data cannot be recovered after it is erased.

Set the new network communication delay for the panel and

SOFTROM.

<number> = 4-30 ASCII characters

Example:

SEND_COMMAND TP,"'XMTO 5'"

Sets the new delay time to 5 seconds.

Set the new network communication retry value for the panel and SOFTROM.

<number> = 1-15 ASCII characters

Example:

SEND_COMMAND TP,"'XMRT 9'"

Sets the number of retries to 9.

Clear all memory and erase buttons, pages, drawings, and symbols.

Example:

SEND_COMMAND TP,"'ZAP!'"

Clears all memory and erases all buttons, pages, drawings, and symbols.

Gray Scale and Programming Numbers

Gray scale shades for the VPT-GS are obtained by using color programming numbers 72-86. These numbers correspond to the basic 16 shades of gray.

ViewPoint Wireless Touch Panels AXCESS Programming 141