AMX Wireless Touch Panels (Wave Server) instruction manual Macro Commands

Figure 210

Macro Commands

Macro Commands
Command	Description
$P <dn> <cn> <tpo>	Send a pulse command for a specified period of time.
<tdp><CR>	dn = device number 2, 3, or 4
	cn = channel number 1-255
	tp = time pulse on in tenths of a second (max. 65535)
	tdp = time delay after pulse in tenths of a second (max.
	65535)
	<cr> = end of statement (Enter key pressed)
	Example
	$P 3 15 10 100<CR>
	Transmit the IR code at device 3, channel 15 for 1 second.
	Then, the macro will pause 10 seconds before executing the
	next command or before finishing the macro if no other
	commands exist.

$W <tdbp><CR>

ViewPoint Wireless Touch Panels

Used as a delay between pulses

tdbp = time delay before pulse in tenths of a second (max.65535)

<cr> = end of statement (Enter key pressed)

Example:

$W 455<CR>

This command will wait 45.5 seconds before executing the next macro command.

AXCESS Programming 159