AMX Wireless Touch Panels (Wave Server) Selection buttons, Information buttons, Keypad buttons

Selection buttons

Selection buttons (Figure 10) appear on touch panel pages and set communication parameters.

Figure 10

Selection button example

Note

These button types will be displayed in black and yellow to indicate that they are only for information and can’t be changed.

Figure 11

Information button example

Information buttons

Information buttons contain serial numbers and firmware version information. The properties of these buttons cannot be changed. Figure 11 shows the serial number information button in the Setup page.

Adjustment buttons

You can use the UP and DN buttons to set adjustment buttons. The adjustment button example in Figure 12 sets the baud rate for the RS-232 connector on the touch panel.

Figure 12

Adjustment button example

Keypad buttons

The keypad button opens a keypad (Figure 13) so you can enter a password or value assignment. All keypad buttons are interactive except for the entry display.

ViewPoint Wireless Touch Panels Touch Panel Basics 15