Figure 94
Protected Setup page
Figure 95
BAUD button
Note
Make sure to match the baud rate for communications with TPDesign3.xx.
Baud
The BAUD button (Figure 95) sets the baud rate. The baud rate is automatically set to
38.4.The BAUD rate is for communicating with your PC when downloading a program or new firmware.
•BAUD Press the UP and DN buttons to set the data communication speed with the . Available baud rates are 300, 600, 1200, 2400, 4800, 9600, 19.2, and 38.4.
Device base
Press the DEVICE BASE button (Figure 96) to open a keypad and set the base address for the touch panel. The base address range is from 1 through 255.
ViewPoint Wireless Touch Panels | Touch Panel Program Reference | 71 |
