AMX Wireless Touch Panels (Wave Server) instruction manual Editor

FACTORY RESET

Figure 113

FONTS menu

Note

You can use the TPDesign3 software program to import variable fonts into the panel.

Warning

You should only use the FACTORY RESET button to erase all stored data in the touch panel. The data cannot

be recovered after it is

erased.•Opens the decision button shown in Figure 114. Press YES to clear all touch panel memory or NO to cancel the operation.

Figure 114

CLEAR MEMORY decision button

Figure 115

EDITOR button

Note

You can exit from the on- board editor by pressing the QUIT EDITOR button on the Edit bar. Refer to the Edit Bar

– Quit Editor option

subsection for detailed

information.

Editor

Press EDITOR (Figure 115) in the Protected Setup page to activate the EDIT mode.

When you exit the Protected Setup page, the EDIT button appears on the top or bottom of the LCD. Press the EDIT button to open the Edit bar (Figure 116) and create buttons, pages, popup pages, and set a wide variety of touch panel settings. The active touch panel page name also appears in the active Edit bar. For example, the Edit bar sample in Figure 116 shows the current page name is New page. Because there are so many operations associated with the EDIT button, they are described in the Edit button subsection.

78 Touch Panel Program Reference ViewPoint Wireless Touch Panels