AMX Wireless Touch Panels (Wave Server) instruction manual Creating a Bargraph

Figure 61

Color palette

Note

The VPT-GS will display gray shades for selection.

Note

Joysticks actually use two level numbers. The first is for the X-axis and the second is for the Y-axis. You only need to specify the first level.

Note

Bargraphs will function on VPW-CP/VPW-GS only.

Figure 62

Bargraph

4.Press black to set the border color.

5.Press the FILL button in the Button Properties page to open the color palette.

6.Press white to set the fill color.

7.Press the TEXT button to open the palette.

8.Press red to set the text color.

9.Press EXIT SAVE CHANGE in the Button Properties page to store the new button properties into memory and return to the current page

10.Press EXIT on the PROPERTIES operation bar

Creating a Bargraph

Bargraphs (Figure 62) are level monitors and adjustable level controls. These levels can be configured to monitor audio outputs, lighting levels, and adjust audio or light levels. Before you start, make sure to connect the touch panel to your Central Controller; otherwise, the bargraph may not work properly. Refer to the Touch Panel

Program Reference.

48 Designing Touch Panel Pages ViewPoint Wireless Touch Panels