Figure 216
Communications settings
Note
Make sure that the ViewPoint touch panel is set to the same Baud rate as your computer.
Figure 217
Change Directory dialog
4.After the Database has been created, press F5 and select Configure. Figure 216 appears.
5.Select your computer’s Com port and baud rate that you wish to communicate with the ViewPoint touch panel.
6.Then, press F10.
7.When the Communications screen has disappeared, press F1 on your computer keyboard. Use the up/down arrow keys and select Change Directory. The dialog in Figure 217 will appear.
164 | Loading Infrared (IR) Files | ViewPoint Wireless Touch Panels |
