AMX Wireless Touch Panels (Wave Server) instruction manual Bargraph Display, Horizontal Bargraph

— BARGRAPH DISPLAY	Sets the bargraph as a vertical indicator for
external devices. Indicator levels must be defined in the AXCESS software
program.
— BARGRAPH ACTIVE	Sets the bargraph as a vertical controller for

external devices. Indicator levels must be defined in the AXCESS software program. When a control level is set on the vertical bargraph, control data is sent to the Central Controller to control an external device.

— BARGRAPH CENTERING Sets the bargraph as a vertical controller with a default control level. Levels must be defined in the AXCESS software program. When a control level change is sent to the Central Controller, the external device changes accordingly until the control data input stops. Then the control level on the vertical bargraph returns to the default position and the external device returns to a default control position.

— SLIDER DISPLAY	Sets the slider as a horizontal status indicator for
external devices. Levels must be defined in the AXCESS software program.
— SLIDER ACTIVE	Sets the slider as a controller for external devices.

Control levels must be defined in the AXCESS software program. When a control level is set on the vertical bargraph, data is sent to the Central Controller to control an external device.

— SLIDER CENTERING Sets the slider as a horizontal controller with a default control level. Control levels must be defined in the AXCESS software program. When a control level change is sent to the Central Controller, the external device changes accordingly until the control data input stops. Then the control level on the bargraph returns to the default position and the external device returns to its default control position.

— BATTERY VOLTAGE Sets the button to show the voltage level of the battery (if equipped).

•STRING Opens the keyboard where you enter the data string to be sent to the Central Controller via AXlink or RF communications. The data string appears in the STRING button. Press ABORT to close the menu.

For a description of the other items in this page, refer to the Properties subsection.

Horizontal Bargraph

Select HORIZONTAL BARGRAPH from the Button Types menu to set the selected button as a Horizontal Bargraph button (VPW-CP/VPW-GS only). The button type HORIZONTAL BARGRAPH and associated options appear in the Button Properties page as shown in Figure 164.

ViewPoint Wireless Touch Panels Touch Panel Program Reference 107