AMX Wireless Touch Panels (Wave Server) Show palette, Wireless status optional WAV-PK

Note

The WAV-PK page provides read-only information about the Wave-Pack. The only setting that can be changed is the SLEEP TIMEOUT value.

Figure 89

WAV-PK page

Show palette

Press SHOW PALETTE to open the color palette. Pressing the screen again will cause you to leave the Show Palette page.

Wireless status (optional WAV-PK)

The WIRELESS STATUS button appears on the Setup page when an AXR-WAVES Wireless AXlink Virtual Emulator Server is connected to the touch panel. The WAV- PKM provides wireless two-way RF spread-spectrum touch panel control and contains a lead-acid rechargeable battery that supplies independent power to the panel. Refer to the WAVE 2-Way Wireless Accessories and Adapters for Touch Panels instruction manual for detailed setup information. Press the WIRELESS STATUS button to open the WAV-PK page shown in Figure 89.

The Wave-Pack page shows the following information:

•SLEEP TIMEOUT Press the UP and DN buttons to set the sleep time-out. The minimum time-out is 1 minute and maximum is 120 minutes. When the touch panel goes to sleep, all communication and battery discharge stops. If the time-out is set to 5, the panel goes into sleep mode if there is no activity for 5 minutes. The touch panel automatically wakes up when you touch the screen for more than 0.5 seconds.

64 Touch Panel Program Reference ViewPoint Wireless Touch Panels