AMX Wireless Touch Panels (Wave Server) Designing Touch Panel Pages, Activating the Edit button

Designing Touch Panel Pages

Note

Information within this section applies to all ViewPoint models except as noted.

Overview

These step-by-step instructions describe creating touch panel pages, buttons, joysticks, bargraphs, and setting page color attributes. For in-depth information on all the operations available on the touch panel, read through the Touch Panel Program Reference section to learn about all the operations and techniques you can use to design touch panel pages.

The VPT-CP and VPT-GS ViewPoint one-way models do not support bargraphs, joysticks, VGA, or Video. These functions are available on the EDIT dropdown menus and can be setup. However, the functions are not operational.

The VPW-CP and VPW-GS are two-way RF and supports bargraphs and joysticks.

Note

If you have a pre-programmed panel, you may not see the Main page.

Figure 18

Main page

Activating the Edit button

Before designing a touch panel page, activate the EDIT button that contains options to add and configure touch panels and buttons. When powering up the mini-touch panel, the first page is the Main page shown in Figure 18. Refer to Edit button and Go to information in Touch Panel Program Reference if the Main page does not appear.

ViewPoint Wireless Touch Panels Designing Touch Panel Pages 19