ViewPoint Wireless Touch Panels Touch Panel Program Reference 73
Select a page to designate as the first page to appear when you power up the touch
panel. Select NONE to disable this option. If none is selected, the last selected page
will be the first active page the next time the touch panel is used.
Wake up message
Press WAKE UP MESSAGE (Figure 100) to open the touch panel keyboard, and enter
an ASCII string to be sent to the Central Controller when the touch panel wakes up.
You can program the Central Controller to perform specific operations when the
message is received. Refer to the AXCESS Programming section for detailed
programming information.
Auto assign
Press AUTO ASSIGN (Figure 101) to enable the automatic channel assignment. This
option sets the touch panel to prompt you to manually or automatically assign a
channel number (1 through 255) to a new button. Once selected, the touch panel
assigns the lowest unused channel number to the button. Press AUTO ASSIGN again
to disable.
Figure 99
POWER UP PAGE button
and example PAGE menu
Figure 100
WAKE UP MESSAGE button