AMX Wireless Touch Panels (Wave Server) instruction manual Wireless Status for VPW-CP and VPW-GS

5 minutes. The touch panel wakes up when you touch the screen for more than .5 seconds.

•ViewPoint Module Not functional at this time.

•Module Version VX.XX Shows the ROM firmware version installed in the ViewPoint.

•Battery Voltage XX.X Shows the voltage level of the Nickel Metal Hydride rechargeable battery.

• Battery Not Charging/Battery Charging Battery Not Charging

appears when the Nickel Metal Hydride battery is not charging. Battery Charging appears when the Nickel Metal Hydride battery is charging. The shaded area in the horizontal gauge button moves from left-to-right as the battery voltage level increases.

•Supply Voltage VX.XX Shows the voltage level of the external power supply connected to the ViewPoint.

•AMX RF ON / OFF Toggles RF transmission on or off.

•AMX IR 38 kHz/455 kHz/OFF Toggles the IR transmitting frequency to 38 kHz, 455 kHz, or off.

Wireless Status for VPW-CP and VPW-GS

The WIRELESS STATUS button appears on the Setup page. The ViewPoint provides two-way RF control and provides one-way IR signaling. The ViewPoint contains a Nickel Metal Hydride rechargeable battery that supplies independent power to the touch panel. Press the WIRELESS SETTINGS button to open the page shown in Figure 92.

68 Touch Panel Program Reference ViewPoint Wireless Touch Panels