Note
The 2-way ViewPoints do not support AMX IR codes (38 KHz and 455 KHz) but do support other manufacturers IR codes. The 1-way ViewPoints support all IR codes.
The VPW-CP/VPW-GS operates on 2.4 GHz for two-way RF communications with the AXR-WAVES Server. It also provides one-way IR using other manufacturers IR codes.
If you plan to use multiple one-way ViewPoints within the same locals, it is strongly recommended that each unit be ordered for operation on different RF frequencies. This will prevent erroneous data being received by the respective AXCESS Central Controller.
Cleaning the Touch Overlay
You should clean the touch screen overlay after each day’s use. Materials required are:
•Two clean, soft texture cotton cloths
•Spray bottle of cleaning solution consisting of 50% isopropyl alcohol and 50% water.
1.Turn the ViewPoint off.
2.Spray a small amount of the cleaning solution onto one of the cloths.
3.Clean the touch panel overlay with the damp cloth.
4.Wipe the touch panel overlay with the dry cloth.
ViewPoint Rechargeable Battery
The ViewPoint requires use of a VPA-BP ViewPoint Rechargeable Battery. Figure 4 shows the VPA-BP and placement in the ViewPoint.
ViewPoint Wireless Touch Panels | Installation | 7 |
