AMX Wireless Touch Panels (Wave Server) Setting the bargraph properties, Setting the channel code

Figure 65

Button Properties page for Vertical Bargraphs

Note

Bargraphs will function on VPW-CP/VPW-GS only.

Figure 66

Bargraph CHANNEL code buttons

Note

The panel will not allow you to enter a device number greater than the DEVICE USED without first displaying a decision box. This box asks you to decide whether you accept the new selection or default to the previous value

Setting the bargraph properties

Use the Button Properties page for Vertical Bargraphs shown in Figure 65 to set channel, level, and button colors.

Setting the channel code

The channel buttons that set the device and button channel codes for the touch panels are shown in Figure 66.

1.Press DEV to open the keypad and set the device number.

2.Enter 1, 2, 3, or 4 in the keypad. The AXCESS software program uses device codes 1 through 4 to identify the touch panel. Refer to the Touch Panel Program Reference section for detailed information.

3.Press ENTER to store the device number into memory, close the keypad, and return to the Button Properties page.

50 Designing Touch Panel Pages ViewPoint Wireless Touch Panels