60 Touch Panel Program Reference ViewPoint Wireless Touch Panels
The Beep button sets the duration of the audible beep provided by the touch panel.
The values are 0 to 5. Using 0 turns the beep tone off and 1 through 5 provide the
audible beep and gradually increase the beep duration.
The DISPLAY TIMER button (Figure 82) sets the length of time the touch panel can
be idle before activating screen-saver sleep mode.
Figure 80
Setup page
Note
The WIRELESS STATUS
button appears when a WAV-
PK or SMT-PK is attached to
the touch panel.
Figure 81
BEEP button
Note
You can set the beep value
using the 'ABEEP' and
'ADBEEP' Send_ Commands
described in the AXCESS
Programming section. The
'QBEEP' command is used for
overriding.
Optional
WIRELESS
STATUS button
for WAV-PK and
SMT-PK wireless
control