Figure 200
Affected Send_Commands
Programming the ViewPoint
You can program the ViewPoint to perform a wide variety of operations using AXCESS Send_Commands and variable text commands. Use the commands described in this section along with the AXCESS Programming Language instruction manual to program the ViewPoint.
AXCESS Programming Changes
The AXCESS program may need to be modified to conform to those ranges and variables set in the new version 3.xx firmware.
The following describes those version 2.xx features that have either been modified or are no longer supported within the new version 3.xx firmware:
•E - Timer The elapsed timer feature is not supported by the version 3.xx. firmware. AXCESS code can be written to simulate this feature.
•ICONS features Some features within the Icons
•SEND_COMMANDs Figure 200 is a list of some commands that need to be adapted to conform with the new parameters and enhanced functionality present in the version 3.xx firmware.
Affected Send_Commands
Command | Description |
|
|
!C | Sets the border, font, and text in one command |
!F | Shorthand version of ‘FONT’ command |
!I | Shorthand version of ‘ICON’ command |
CBON | Sets the ON feedback border color to the specified color |
CBOFF | Sets the OFF feedback border color to the specified color |
FONT | Changes the font size (or style) of the text in a specific button |
ICON | Changes border style of a specific button |
All other AXCESS Color and Variable text Send_Commands are listed in this section. They should be checked to verify that they comply with version 3.xx parameters and functionality.
134 | AXCESS Programming | ViewPoint Wireless Touch Panels |
