Remote Transmission You are transmitting the signal to control unit
Trunk Release Trunk open. Trunk symbol only.
Vibration Mode Remote Control vibrates when the system is triggered
Power Save Mode
Save the battery power
In – Range Indicator You are within the remote control range.
Low Battery
You have to replace the battery of remote control.
Ignition On
Driver paging
Someone is paging you in front of your vehicle. **
**Press the valet switch in the vehicle with the Ignition OFF to page the driver carrying the
PROGRAM MODE FOR LCD REMOTE CONTROL TRANSCEIVER:
Press and hold all four remote control buttons simultaneously unit one long beep is heard. LCD Programming has now been entered.
Transceiver | System Function | Remark | ||
Button |
|
|
|
|
Program | Mode | Switching code for 2nd / 1st Car | Press within 5 | |
- |
|
| Operation | seconds |
Program | Mode | Melody / Vibration Mode | Press within 5 | |
- |
|
|
| seconds |
|
|
|
| |
Program | Mode | Power Save Mode | Press within 5 | |
- |
|
|
| seconds |
|
|
| LCD screen lamp turns on for 5 |
|
|
|
| seconds. |
|
- | + |
| Clear the Flash Icon and Melody | Press within 3 |
|
|
| Sound | seconds |
1.Second Vehicle Security Operation: Your remote transmitter can be utilized to control a second vehicle’s Auto Page security system. To program the remote control transmitter to a second vehicle, follow the instructions for Transmitter programming. All programming parameters are the same except for the following:
10