Auto Page RS-622 manual Dome Light Convenience Delay & Supervision, Ignition Control Door Locks

Page 5

Enter Valet Mode:

1.From the Unlock condition, turn the ignition to “ON” position.

2.Push and hold valet switch for 2 seconds until the LED turns on. The LED will remain on as long as the system is in ‘valet mode’.

Exit Valet Mode:

1.Return to normal operation, turn ignition ‘on’.

2.Push and hold valet switch for 2 seconds, The LED will turn off indicating the system has exited the valet mode.

PANIC FUNCTION: (IF SIREN or HORN IS INSTALLED)

The transmitter can be used as a remote panic switch to manually trigger the vehicle’s horn in case of emergency.

1.Press and hold the button for 3 second. The siren will immediately sound.

2.During panic mode, the normal function of this transmitter button

will be suspended. The and buttons can be used to lock and unlock the doors (if the option is installed),

3.To stop the panic, press the button on the transmitter again.

4.If no buttons are pressed, the panic function will stop automatically in 30 seconds.

DOME LIGHT CONVENIENCE DELAY & SUPERVISION

This system has a unique feature, which will turn on your vehicle dome light as follows: (optional) Additional installation required.

1.Upon unlocking, the interior lights will remain on for 30 seconds. Note: Turning on the ignition switch or activating the system will turn off the dome light.

IGNITION CONTROL DOOR LOCKS

If the vehicle’s door locks have been interfaced to the security system, the system will automatically lock the vehicle’s doors when the ignition is turned “ON” and /or unlock the vehicle’s doors when the ignition is turned “OFF”.

TRUNK RELEASE (Additional Installation Required)

Press and hold the button on transmitter for two seconds to remote control the trunk release or other electric devices.

CAR LOCATOR (ONLY IF SIREN or HORN IS INSTALLED)

Press the button twice when the system is armed to active car locator function. The horn will chirp 6 times. The parking light will flash 12 times, for you to easily locate your car.

5

Image 5
Contents RS-622 System Operations XT-42LCD 2-Way XT-33 Transceiver Standard Remote Changing the Battery in Your TransmittersActive Lock Active UnlockValet Mode Chirp IndicatorPathway Illumination LED DisplayIgnition Control Door Locks Dome Light Convenience Delay & SupervisionTo Turn OFF the Remote Start Safety Start OperationTo Remote Start the Vehicle Temporary Stop Feature If installedTo Override Vehicle from Remote Start Control EnterDisabling the Remote Start System If Optional toggle switch Exit the timer startShutdown Input for Remote Starter XT-42 LCD Transmitter OperationStart Mode Valet Mode Battery ReplacementRemote LCD Icons with Function Door LockIgnition On Driver paging Program Mode for LCD Remote Control TransceiverProgram Mode For 2-way LCD Remote Control Transceiver For Regular Remote Control TransmitterVibration / Melody Mode Back to first Car OperationStop The Trigger Melody Sound Screen Lamp onClear the Flash Icon and Melody Sound See note below regarding product installation Limited Lifetime Warranty ProvisionsAuto Page Warranty Perchlorate Material Special handling may apply Page Knox Street Unit B, Torrance, CA