SPECIAL FUNCTIONS
This section describes your Model 36’s special
THINGS YOU SEE
On-Screen Displays
To view your Model 36’s current operating mode and other information about your Model 36, re- peatedly press DISPLAY during playback or while watching TV. Each time you press DIS- PLAY, you see the following information in this order.
• Function indicator/tape speed/tape counter
Function Indicator
STOP
Tape Speed
Tape Counter
SP COUNT 0:12:34
• Function indicator/tape speed/time/channel
STOP | 5:40PM | Time |
| CH 2 | Channel |
|
|
SP
• No display
Notes:
•The function indicator and tape speed only appear for a few seconds, but the tape counter or time and channel indicators remain on until you select another function.
•When you use closed captioning (see “Closed Caption” on Page 27), all the infor- mation (function/tape speed/time/channel/ tape counter) appears the first time you press DISPLAY.
Function Indicators
Each time you press a function button (such as STOP), the selected function’s indicator appears for about 5 seconds.
STOP
When you change the channel, the new channel number appears for about 5 seconds.
Note: If you play back a poor quality (worn) or damaged tape, the function indicator might not appear.
USING THE SLEEP TIMER
The Model 36’s sleep timer lets you set the Mod- el 36 so it plays for a specific amount of time, then automatically turns off.
To set the sleep timer, repeatedly press SLEEP until the TV screen shows SLEEP and the de- sired sleep time period (such as SLEEP 30 MINUTE). You can set the time in
After 5 seconds, SLEEP and the selected sleep period disappear.
Press SLEEP at anytime while the timer is on to view the remaining sleep time for 5 seconds.
To cancel the sleep timer, repeatedly press SLEEP until SLEEP 0 MINUTE appears.
24
