Changing the Channels Stored in Memory
Although the Model 36 automatically stores all active channels in your area the first time you turn it on, you can manually set the Model 36 to
Note: If you tune both TV (broadcast) and CATV (cable TV) signals, you can store both types of channels.
1.Press MENU to select the main menu.
2.Press PLAY/s or STOP/t to select CHANNEL SET UP, then press F.FWD/ 
. The channel set up menu appears.
3.Press PLAY/s or STOP/t to select AUTO PRESET, then press F.FWD/ 
. The Model 36’s tuner scans through the channels (TV or CATV) and stores all the active channels in your area. CH and the currently tuned channel number appear. After scanning all the channels, the tuner stops on the lowest- numbered active channel.
4.To review the stored channels, repeatedly press CHANNEL s or t.
Note: You can directly select channels that are not stored in the tuner’s memory by using the re- mote control’s number buttons. See “Selecting Channels” on Page 20.
Note: Precede a
5.Repeatedly press F.FWD/ 
or REW/ 
until the channel number for the channel changes to blue (to add the channel) or to red (to delete the channel).
08
ADD / DELETE
6. Press MENU to exit.
SELECTING THE INPUT SIGNAL
Depending on the type of input device (antenna or cable) connected to your Model 36, you must select the input signal (the source you want the Model 36 to tune).
1.Press MENU to select the main menu.
2.Press PLAY/s or STOP/t to select CHANNEL SET UP, then press F.FWD/ 
. The channel set up menu appears.
– CHANNEL SET UP –
TV/CATV
[TV]
AUTO PRESET
ADD / DELETE CH
Adding/Erasing Channels
If a channel you want was not stored, or if a channel you do not want was stored, follow these steps to add or erase it.
1.Press MENU to select the main menu.
2.Press PLAY/s or STOP/t to select CHANNEL SET UP, then press F.FWD/ 
. The channel set up menu appears.
3.Press PLAY/s or STOP/t to select ADD/ DELETE CH, then press F.FWD/ 
.
4.Press CHANNEL s or t or use the number keys on the remote control to enter the channel number you want to add or erase.
3.Repeatedly press F.FWD/ 
or REW/ 
to select the desired input signal (TV or
CATV).
•If you connected an antenna (not cable) to the Model 36 and want to receive up to 68 VHF/UHF channels, or if you have cable service and use a cable box, you must select TV.
•If you have cable service and do not use a cable box, you must select CATV.
4.Press MENU to exit the menu.
17
