Dubbing a Tape
Note: For the best results while dubbing, hold the remote control close to the Model 36’s infra- red window when you press a button. Other- wise, the remote control might affect the dubbing source’s operation.
1.Prepare the dubbing source to play a tape.
2.Insert a blank cassette, or one that you want to record over, into the Model 36’s cassette compartment. The Model 36 turns on.
3.Enter 00 using the remote control’s number buttons, or press CHANNEL s or CHANNEL t to select one channel higher than the high- est programmed channel or one channel lower than the lowest programmed chan- nel. AUX appears on the Model 36’s TV screen.
4.Repeatedly press SPEED on the remote control until the desired recording speed (SP, LP, or SLP) appears on the TV screen.
5.Press REC/OTR on the Model 36 or RECORD on the remote control to begin recording.
6.Start the dubbing source.
7.To turn the TV picture off or on while recording, press POWER.
8.Press STOP on the remote control or STOP/ EJECT on the front of the Model 36 to stop recording before it automatically stops at the end of the tape. Then stop the dubbing source.
35
