Setting | REW/ | F.FWD/ |
|
|
|
|
|
|
BRIGHT | to | to |
| decrease | increase |
|
|
|
CON- | to | to |
TRAST | decrease | increase |
|
|
|
COLOR | toward | toward |
| pale | brilliant |
|
|
|
TINT | toward | toward |
USING CHANNEL RETURN
The Model 36’s channel return function lets you quickly switch between channels you tuned (in- cluding AUX, see “Viewing an External Device”) by using the remote control’s number buttons.
Repeatedly press CHANNEL | REW | STOP | F.FWD |
RETURN on the remote con- | RECORD | SPEED | PAUSE/STILL |
| CHANNEL | ||
trol to switch from the channel |
| CLEAR | RETURN |
| COUNTER |
| |
|
| RESET MEMORY |
|
you are watching to the previ-
TV/VCR COMBINATION
| purple | green |
|
|
|
SHARP- | toward | toward |
NESS | soft | clear |
ous channel you tuned, and vice versa.
MODEL 36
•To quickly change the displayed setting, hold down REW/ 
or F.FWD/ 
.
•If you do not press REW/ 
or F.FWD/ 
within 5 seconds, the displayed setting disappears. Start over at Step 2.
5.Either wait 5 seconds or press MENU to exit.
USING MUTE
To temporarily turn off the Model 36’s sound, press MUTE. MUTE and the volume level bar ap- pear.
To restore the sound to the previous level, press MUTE again. To restore the sound and change its level, press VOLUME s or t.
VIEWING AN EXTERNAL DEVICE
To view the signals from an external device you connected to the audio/video input jacks on the front of the Model 36 (see “Connecting an Exter- nal Device” on Page 13), do either of the follow- ing:
•Enter 00 using the remote control’s num- ber buttons.
•Select one channel higher than the highest programmed channel or one channel lower than the lowest programmed channel.
AUX appears on the TV screen.
21
