Installation / Operation, Switching off

Installation / Operation

•Place the rear left-hand edge of the control panel 1on the control panel attachment point dson the front of the device.

•Ensure that the plug-in connection strip cris positioned in front of the connection socket dl.

•Carefully press the rear right-hand edge of the control panel 1against the control panel attachment point dpuntil it distinctly locks into place.

•Fold the control panel 1upwards and allow it to lock into place.

LSwitching off

•Press the button cp. The background illumination of the control panel 1goes off and the time appears in the display window 9. When the radio is switched off it stores all settings from the last time it was operated. The device automatically adjusts the time with the help of the radio signals received. When the radio is switched on again it plays back the last audio storage medium used or the tuner.

LOperation

LSwitching on

• Press the button cp.

The factory settings of the device are as follows:

•The word [WELCOME] appears in the display window 9.

•The buttons are illuminated in blue (these can be adjusted on two levels).

•Press the MU/DIM button bofor 2 seconds. If it is pressed again for 2 seconds the brightness of the display window is increased once more.

-The tuner is activated and [FM1] (1st FM band), [87.50] (station frequency) appears in the display window 9. [AF] flashes.

-The loudspeakers play back the reception from the tuner.

•Turn the “SEL / VOL” control knob coto adjust the volume as desired.

14 GB/IE

LSelecting and adjusting the sound

VOL: Volume of the loudspeakers

•Adjust the loudspeakers to the desired volume by turning the “SEL / VOL” control knob co.

BAS: Bass (lower range of the loudspeaker sound)

•Press THE “SEL / VOL” control knob countil [BAS] appears in the display window 9.

•Turn the “SEL / VOL” control knob coto set the desired bass level.

Values between [-7]and [7] can be selected.

TRE: Treble (higher range of the loudspeaker sound)

•Press the “SEL / VOL” control knob corepeatedly until [TRE] appears in the display window 9.

•Turn the “SEL / VOL” control knob coto set the desired treble level.

Values between [-7]and [7] can be selected.

BAL: Balance (difference in volume between the left [L] and right [R] loudspeakers)

•Press the “SEL / VOL” control knob countil [BAL] appears in the display window 9.

•Turn the “SEL / VOL” control knob coto set the desired balance.

Values between [10L] and [10R] can be selected. The mean value is [0].

FAD: Fading (difference in volume between the front [F] and rear [R] loudspeakers)

•Press the “SEL / VOL” control knob countil [FAD] appears in the display window 9.

•Turn the “SEL / VOL” control knob coto set the

KH2391_Content_UK.indd 14

05.09.2006 14:49:13 Uhr