Safety

·When installing in a motor vehicle please ensure that the vehicle cannot be operated and has been securely immobilised!

Turn off the ignition and park the vehicle with the handbrake applied.

·Complete the connection to the 12 V DC power supply with full protection against moisture!

·Ensure that the 12 V DC power supply is discon- nected when carrying out installation, mainte- nance and servicing!

·Do not place the device in the vicinity of mois- ture, fire, heat and prolonged temperatures above 50° C!

·Do not damage any lines required for fuel, electricity, brakes, hydraulics, water or data transmission when attaching the screws!

·Ensure that the plug-in for 12 V DC constant current fn, the plug-in for 12 V DC ignition cur- rent fpand - if applicable - the plug-in electric aerial fodo not come into contact with a fuel line (e.g. petrol pump)!

·Do not allow yourself to become distracted from the road traffic when operating or reading the displays of the car radio! Acquaint yourself with operation of the radio before starting your journey and practise how to use the radio‘s features safely! You should also adjust the volume in such a way that you can hear the sirens of emergency vehicles.

mCaution!

·Ensure that you do not injure or damage the sensitive hearing of your passengers (particularly infants, children and pets) in the vehicle! Adjust the volume and balance of the loudspeakers to a safe and comfortable level for all passengers! Note: Adjust the volume such that you can always hear the warning signals of other road users.

·Before operating the radio, check that all com- ponents have been installed in accordance with the instructions!

·Before assembling and operating the radio, check that the supplied parts are complete and not damaged!

·Use the car radio only with the original supplied parts!

·Do not cover the metal housing duwith other objects!

·Protect all electrical contact surfaces against short circuits, moisture, damage and dirt!

·Do not place the device on or next to the battery of a motor vehicle!

·Prevent short circuits and damage! Please ensure that no foreign bodies or objects get inside the radio!

·In case of malfunctions or damage please disconnect the car radio immediately from the 12 V DC power supply!

·Connect to the loudspeakers, CD changer, amplifier and audio storage media (CD, CD-R, CD-RW, USB memory stick, MP3 player, SD and MMC) in accordance with the respective operating instructions!

·The car radio should only be repaired by au- thorised and trained specialists! If your radio needs repairing, please contact the service centre for your country (see guarantee card)!

·Do not subject the device to any mechanical loads!

·Prevent theft and unauthorised use in particular when the device is installed in a motor vehicle! Before leaving a parked vehicle remove the control panel from the car radio and store it in the plastic box to protect it.

·Damaged fuses should only be replaced by new fuses of the same type and with the same ampere value!

·If you are not going to use the remote control for a prolonged period, please take out the battery!

Tip! What course of action you should follow!

·Take your time when familiarising yourself with operation of the car radio! Ensure a tidy and undisturbed environment for the work required and carry it out with maximum concentration.

·Plan the installation location with care. Ensure that when the car radio is installed it does not cause any obstacles to the driver.

·The very sensitive CD-R, CD-RW discs should be used in accordance with their instructions!

·Ensure that audio storage media can be played back unhindered! Clean CDs, CD-Rs and CD-RWs before use with a dry, antistatic cloth, beginning

GB/IE

KH2391_Content_UK.indd 9

05.09.2006 14:49:10 Uhr