Models Available, Accessories | GE Monogram ZX2L SS specs

Models

Available

Design Information

		Dual Burner Outdoor Cooktop

Monogram Dual Burner Outdoor Cooktops		These models can be mounted to the right
are factory set for LP or natural gas. Order the		side of a Monogram 27" wide grill which has
model for your installation situation.		been installed on a cart.
Liquid Propane	Natural Gas	These models can also be installed in a
Model ZX2L SS	Model ZX2N SS	combustible or non-combustible enclosure.

Product

Dimensions

& Clearances

When installed on the side of a grill cart, allow 6" clearance at the rear and right side to vertical combustible materials.

When installed in an enclosure, allow 6" clearance at the rear and both sides to vertical combustible materials.

When installed in a combustible enclosure, the cooking surface should be 1" above adjacent horizontal surfaces.

10-1/2"

23-3/4"

13"

25-3/4"

Accessories

Both LP and Natural gas models may be installed on a 27" wide portable grill cart. Both models are shipped with support brackets to secure the burner to the right side of the cart.

Accessories should be ordered with the burner and be on site at the time of installation.

ZX27QDC – LP Quick Disconnect Tee

For installation onto a 27" cart.

ZX2TKYSS Trim Kit

For a built-in installation, the enclosure, can be constructed of non-combustible (masonry) material or of combustible material such as wood. This trim kit conceals the back and side edges of the opening.

ZX2JYSS Insulated Jacket

An insulated jacket is required when installing into a combustible enclosure.

Advance Planning

•Monogram Dual Burner Outdoor Cooktops are designed to be installed on the right side of a 27" grill cart or built into an enclosure.

•In a non-combustible (masonry) enclosure, the burner drops into the opening. A solid deck beneath is required for support from the bottom.

•An insulated jacket is available to allow the grill to be installed in a combustible enclosure. The insulated jacket must be supported from the bottom by a solid deck or ledge on each side beneath the jacket.

•A trim kit is available for built-in installations to conceal the back and sides of the opening.

Clearances:

•When installed on the side of a grill cart, allow 6" clearance at the rear and right side to vertical combustible materials.

•When installed in an enclosure, allow 6" clearance at the rear and both sides to vertical combustible materials.

•When installed in a combustible enclosure, the cooking surface should be 1" above adjacent horizontal surfaces.