Operating the Bluetooth functions
1Press .
The call menu appears.
2Rotate the control dial until the desired item appears, then press it.
3Press (BACK)*.
The source returns to the Bluetooth phone.
*For PAIRING, REDIAL, VOICE DIAL and BT SIGNL settings, step 3 is not necessary.
The following items can be set:
PAIRING*1 (page 23)
PHONEBOOK (page 26)
REDIAL (page 27)
RECENT CALL (page 26)
VOICE DIAL (page 28)
DIAL NUMBER (page 27)
RINGTONE*1*2
Selects whether this unit or the connected cellular phone outputs the ringtone: “1 (this unit)”- “2 (cellular phone).”
AUTO ANS*1 (Auto Answer)
Sets this unit to answer an incoming call automatically:
BT SIGNL*1 (Bluetooth Signal) (page 24, 25)
BT INIT*3 (Bluetooth Initialize) (page 30)
*1 You can also select these items by pressing and rotating the control dial to
select “BT.”
*2 Depending on the cellular phone, this unit’s ringtone may be output even if set to “2 (cellular phone).”
*3 Appears on the setup menu when the unit is turned off.
Pairing
The Bluetooth device (cellular phone, audio device, etc.) and this unit need to be “paired” before use between each other via the Bluetooth function.
Tips
•For details on pairing for a Bluetooth device, refer to the operating instructions supplied with the device.
•You can pair up to 9 Bluetooth devices with this unit.
1Place the Bluetooth device within 1 m (3 ft) of this unit.
2Press and rotate the control dial until “PAIRING” appears, then press it.
The unit enters pairing standby mode.
Flashing
3Set the Bluetooth device to search for this unit.
A list of detected devices appears in the display of the device to be connected. This unit is displayed as “Sony Automotive” on the device to be connected.
23