App Remote via Bluetooth wireless technology (Android phone)
Downloading the “App Remote” application from Google Play is required for Android phone.
If the application is downloaded to an Android phone and connected to the unit, the following features are available:
–Operate the unit to launch and control compatible applications on Android phone.
–Operate Android phone with simple finger gestures to control the source of the unit.
–Display detailed source information (song title, artist name, album art, etc.) on Android phone.
–Read out incoming text messages/SMS
automatically.
Available operations differ depending on the application. For details on available applications, visit the support site on the back cover.
Notes
•For your safety, follow your local traffic laws and regulations, and do not operate the application while driving.
•The “App Remote” application via the Bluetooth function is only available for Android phones with Android 2.1, 2.2, 2.3 or 4.0 installed.
•Automatic reading of the SMS function is only available for Android phones with TTS Engine installed.
•You cannot control the “App Remote” application via the Bluetooth function while running Pandora® via Bluetooth.
Two-way Music Control with Android phone
Before connecting the mobile device, turn down the volume of the unit.
1Connect this unit and the mobile device via the Bluetooth function (page 22).
2Start up the “App Remote” application.
3Press and hold (APP) on the unit for more than 2 seconds.
Connection to the mobile device starts. When connection is established, the name of the application on the mobile device appears when selecting a source, and some playback operations for the application become available. (Available operations differ depending on the application.)
Likewise, some playback operations of the unit can be controlled by the mobile device. For details on the operations on the mobile device, see the help of the application.
Note
When the mobile device is connected, the device number may appear. Make sure that the same
numbers are displayed (e.g., 123456) in this unit and the mobile device, then press on
this unit and select “Yes” on the mobile device.
Tip
You can also press , rotate the control dial to select “APP REM,” then press it to
establish the connection. And then press to select the source.
To terminate connection
Press and hold .
32