SECTION 3
DISASSEMBLY
Note: Follow the disassembly procedure in the numerical order given.
3-1. LOADING PANEL
1Turn ON the power, and press the EJECT button to open the tray.
2Remove the loading panel in the arrow direction.
3 Press the EJECT button to close the tray.
• If the power cannot be turned ON, refer to “Opening the Disc Tray When the Power is OFF” of “Service Note”, and open the tray.
Loading panel
Power button
Eject button
3-2. GLASS ASSY
4 3
4
1 Screw (PTP2.6x6)
2 Bracket (shaft)
(Bottom side)
– 8 –