MZ-E707
4-7. SOUND SKIP CHECK RESULT DISPLAY MODE
This set can display and check the error count occurring during play.
•Setting method of Sound Skip Check Result Display Mode
1. Setting the test mode.
2. Press the > N key activates the sound skip check result display mode where the LCD displays as shown below.
LCD display
000P**P##
Total of play system error count
Total of record system error count
3.When > N key is pressed, the total of error count is dis- played on the LCD, and each time the > N key is pressed, the error count descents one by one as shown below. Also, when
. key is pressed, the error count ascends by one.
000P**R00
000 EIB **
000Stat**
000Adrs**
000BEmp**
000######
P**R00 : Total of play system error and record system error count
** : Sound skip check items counter (hexadecimal)
#####:
| Cause of error | Description of error |
|
|
|
Playback | EIB | Sound error correction error |
|
|
|
| Stat | Decorder status error |
|
|
|
| Adrs | Cannot access the address |
|
|
|
| BEmp | Buffer becomes empty |
4.Quit the sound skip check result display mode, and press the x key to return to the test mode. (display check mode)
4-8. KEY CHECK MODE
4-8-1. Outline of the function
This mode is used to check to make sure that each of the keys (including the slide switch) on the set operates normally.
4-8-2. Setting the Key Check mode
1.Set the TEST MODE. Press and hold down DISPLAY key (for more than 3 sec) to set the Key Check mode.
LCD display
000
2.When each key on the set and on remote control is pressed, its name is displayed on the LCD. (The operated position is dis- played for 4 sec after the slide switch is operated. If any other key is pressed during this display, the LCD switches to its name display)
Example: When > N key on the set is pressed: LCD display
000FF
Example: When > N key on the remote control is pressed:
LCD display
000rPLAY
XX:AD value of the remote control key (hexadecimal 00 to FF)
3.When all the keys on the set and on the remote control are con- sidered as OK, the following displays are shown for 2 sec. (The key pressed to enter the Key Check mode has been checked even if it is not pressed in this mode)
Example: When the keys on the set are considered as OK: LCD display
888SET OK OF 
Example: When the keys on the remote control are considered as OK:
LCD display
888RMC OK OX 
4.When all the key have been checked or when the top panel is opened during this checking, the system terminates the Key Check mode and return to the TEST MODE.
11