Call waiting
If you have subscribed to call waiting, your phone will beep during a call to let you know you have an incoming call. Your phone may also display the incoming caller’s identification
See “Call forwarding” on page 22 for details on caller ID.
Answering an incoming call with call waiting
Press 
Swapping between two calls
Press 
Ending the calls
Press 
to end both calls
Activating call waiting
You can also activate this feature with your phone; simply ask your service provider for the feature code, store it into your phone, then activate it.
Note: This feature may not appear in your phone’s menu or function properly until the feature code has been stored.
See “Network feature setting” on page 47 for more details.
1.Press Menu 4-4-2 (Settings - Network services - Call waiting)
2.Press τ to Activate (or select Cancel to cancel)
3.Press OK
4.Your phone will attempt to call the network to confirm the feature code you entered in Menu
5.Once the feature code has been confirmed, the feature is activated.
Caller ID
This is a network service that helps identify incoming calls. Contact your service provider for details.
26
When Caller ID is active, your phone may display the caller’s phone number. The caller’s name may also display if their name and number has been stored in the phone book or if the wireless network supports it.
Call or
Note: If you have stored a number more than once in your phone book, and that number is stored each time with a different name, then a name will not appear when someone calls from that number.
See “Personal Tone” on page 50 for details on your phone book.
Calling card 
If you wish to use a calling card for long distance calls, you must first store your calling card information into your phone. Your phone can store up to four calling cards.
Storing a calling card
1.Press Menu 4-1-3 (Settings - Call settings - Calling card)
2.Press τ or σ to desired calling card, press Options
3.Press τ or σ to Edit, press OK
4.Enter security code and press OK
See “Security code” on page 62 for details on your phone’s security code.
5.Press Select at the Dialing sequence prompt. Use the following chart to determine the dialing sequence required by your long distance provider. Then press τ or σ to select the appropriate sequence for your card.
Press Select to confirm your choice.
27