2.Scroll to Options, then press Select
3.Press Select at Scrolling view
4.Press τ or σ to select either Name list, Name+number, or Name only, then press OK
Security settings
This menu includes the following security features:
The Access codes submenu includes Phone lock (page 53), Unlocked phone number (page 72), Change lock code (page 43), and Change security code (page 62).
Security code
Your phone will prompt you for a five digit security code for certain features. These features can be used only after the correct security code has been successfully entered.
Note: When entering your security code, ***** will appear on the display to keep others from viewing your code.
If you make a mistake entering the code, erase the last entered digit by pressing Clear (or press and hold Clear to delete all the digits on your display). Then enter the correct code or press Back to exit the current feature.
If you enter an incorrect security code (Code error will appear) five times in a row, your phone won’t accept any entries for the next five minutes.
Your phone’s default security code is 12345. It’s highly recommended that you change this code at once, write it down, and store it in a safe place away from your phone.
Changing your security code
1.Press Menu
2.Enter security code and press OK
3.Enter new security code at Enter new security code:, 62
press OK (must be five digits)
4.Enter new security code again at Verify new security code:, press OK
5.Phone will display Security code changed
Note: If you have changed your security code and don’t remember the new code, contact your service provider. Once you have changed your security code, the default setting is no longer valid.
Send own caller ID with next call
In most service areas, when you call someone your name will be presented to his/her caller ID (if they subscribe). This feature allows you to block their caller ID (your number will not be displayed) when you call them. This feature works on a
Please be aware of the following:
•This feature is only effective when calling to a number that is equipped with Caller ID.
•This feature is available only when supported by the wireless network, and may not function if you are roaming.
Note: Before you can activate this feature, you should first store the feature code given to you by your service provider. Otherwise, this feature may not appear in the menu or function properly. Check with your service provider to confirm if the feature code has been
1.Press Menu
2.τ to Yes (to show your number) or No (to not show it) and press OK
3.Enter the number you wish to call (or press Search to retrieve the number from the phone book and press OK), then press OK
4.Your phone will attempt to call this number with the
feature code you stored in Menu
63