
Configure your data and fax software
6Select the COM port assigned to your PC’s infrared COM port, or the hardware COM port where the
7Set the port speed to 14400 bps, then click OK.
Modify “Locations”
Now that your Nokia phone is configured for use by the AOL software, you need to modify your Locations settings to use your Nokia phone as the active modem.
LOCATIONS SETUP
To modify an existing location:
1From the Connection Setup screen, click the Locations tab.
2
3Click the Connect using
4Click the Speed
5 Click OK to confirm your changes, then click Close to return to the Sign On screen. | 9 |
• CONFIGURING YOUR FAX SOFTWARE
Before you can use your phone to send and receive fax calls, you must configure your fax software so that it uses your phone as the active modem (rather than your existing modem).
Many of the most popular fax programs should support multiple modems connected to a PC or laptop computer, including Symantec WinFax Pro, Smith Micro Software HotFax (version 3.02 or newer), Castelle FaxPress, etc.
Note: Data or fax calls using your Nokia phone are possible only if your service provider supports digital data and fax service. You may be required to subscribe to these services. Check with your service provider before attempting to send or receive faxes.
Select the correct modem
Each fax application typically has a setup menu that can be used to alter the settings for your modem, as well as define how and when calls are to be received (for example: immediately, on the third ring, etc.). This menu may also provide you with a list of available modems that you can use when sending and receiving fax calls.
Use your fax program’s settings menu to select your Nokia phone as the active fax modem.
Hardware setup
Use the modem properties dialog box of your fax software to confirm the following settings:
•Communications port - COMn (where n= the COM port number assigned to your phone)
•Initialization - 19200 bps
•Modem type - Class 2.0
•Flow control - Hardware
[ 31 ]