Sony MZ-N505 service manual Assy11, OfstOK

MZ-N505

OVERALL ADJUSTMENT MODE

• Configuration of Overall Adjustment Mode

Overall adjustment mode . key (Title display)

N key
Protect switch
ON	CD overall
	adjusting
	All item	NG item exists
	OK	or x key
		CD overall
		adjustment
x key		NG
	CD overall
x key	adjustment
	OK
Protect switch	N key
OFF
> key	MO overall
	adjusting
		NG item exists
		or x key
		MO overall
		adjustment
x key		NG
	MO overall
x key	adjustment
	OK
[MENU/ENTER] key		Electrical
		offset
x key		adjustment
[END SEARCH] key		Temperature
		correction
		and
x key		Power supply
		adjustment
[Test mode $display check mode%]		auto item feed

•Overall adjustment mode (title display)

Set LCD display

000Assy**

: (Disc mark) At end of power supply adjustment: Outside lit At end of electrical offset adj.: Inside lit

**: Left side = MO overall adjustment information F*: MO overall adjustment completed

1*: Manual adjustment exists (overall adj. not completed)

0*: Not adjusted

Right side = CD overall adjustment information *F: CD overall adjustment completed

*1: Manual adjustment exists (overall adj. not completed)

*0: Not adjusted

Note: Adjust the CD first, when performing adjustment.

• Electrical offset adjusting method

Caution: The electrical offset adjustment must be made with no disc loaded.

1.Make sure that the power supply voltage is 3 V.

2.Set the test mode (see page 13).

3.Press the . or [VOL --]key to activate the overall adjustment mode.

Set LCD display

000Assy11

4.Press the [MENU/ENTER] key on the remote commander.

Set LCD display

035Ofst**

5.Electrical offset adjustment is over, if the following display appears.

Set LCD display

000OfstOK

•Adjustment Method of CD and MO Overall Adjustment Mode

1.Set the test mode (see page 13).

2.Press the . or [VOL --]key to activate the overall adjust- ment mode.

Set LCD display

000Assy11

26