4-7. Sound Skip Check Result Display Mode
This set can display and check the error count occurring during play.
•Setting method of Sound Skip Check Result Display Mode
1. Setting the test mode.
2. Pressing the > N key activates the sound skip check result display mode where the LCD displays as shown below.
LCD display
000P**R##
Total of record system error count
Total of play system error count
3.When > N key is pressed, the total of error count is displayed on the LCD, and each time the >N key is pressed, the error count descents one by one as shown below. Also, when
. key is pressed, the error count ascends one by one.
000P**R00
000 EIB **
000Stat**
000Adrs**
000BEmp**
000######
P**R00 : Total of play system error and record system error count
** : Sound skip check items counter (hexadecimal)
##### :
Error code
| Cause of error | Description of error |
|
|
|
Playback | EIB | Sound error correction error |
|
|
|
| Stat | Decorder status error |
|
|
|
| Adrs | Cannot access the address |
|
|
|
| BEmp | Buffer becomes empty |
|
|
|
MZ-E501
4-8. KEY CHECK MODE
4-8-1. Outline of the function
This mode is used to check to make sure that each of the keys (including the slide switch) on the set operates normally.(The 1 kHz signal is outputted from the L and R channels of head phones)
4-8-2. Setting the Key Check mode
1.Set the TEST MODE. Press and hold down DISPLAY key (for more than 3 sec) to set the Key Check mode.
LCD display
0000F
2.When each key on the set and on remote control is pressed, its name is displayed on the LCD. (The operated position is displayed for 4 sec after the slide switch is operated. If any other key is pressed during this display, the LCD switches to its name display)
Example: When > N key on the set is pressed: LCD display
000 FF 0F
Example: When > N key on the remote control is pressed:
LCD display
000 rPLAY XX
XX: AD value of the remote control key (hexadecimal 00 to FF)
3.When all the keys on the set and on the remote control are considered as OK, the following displays are shown for 2 sec. (The key pressed to enter the Key Check mode has been checked even if it is not pressed in this mode)
Example: When the keys on the set are considered as OK: LCD display
888SET OK OF
Example: When the keys on the remote control are considered as OK:
LCD display
888 RMC OK OX
4.Press the x key to terminate the sound skip check result display mode and to return to the test mode. (Display check mode)
4.When all the key have been checked or when the top panel is opened during this checking, the system terminates the Key Check mode and return to the TEST MODE.
11