DISPLAYING ‘HIDDEN’ NUMBERS
The phone will display up to 16 digits at a time. If you enter a number longer than this, the first digits will disappear off the side of the display. If you type more than 32 digits, the first digits will be lost.
ATo view the ‘hidden’ digits press and hold RCL.
BTo view the original display again, release RCL.
Having displayed a long number, remember to clear the display (press and hold CLR) before attempting to recall information from a memory location (as the RCL key is dual function, and will not recall memory locations while a number longer than 16 digits is being displayed).
CLEARING THE CONTENTS OF A MEMORY LOCATION
NOTE: Once deleted, the contents of a memory location cannot be recalled.
APress and hold CLR to clear the display.
BPress STO. The message STORE prompts you to specify a memory location number.
CEnter the number of the memory location you want to delete. The message REPLACE CONTENT? will appear.
DPress STO (within 8 seconds). The message STORED and the memory location number will be displayed briefly, confirming that the memory location has been cleared. If you do not press STO within 8 seconds, or if you press CLR, the message STORE NOT DONE will be displayed, and the contents of the location will not be cleared.
MOVING THE CONTENTS OF A MEMORY LOCATION
You may move the name and number stored in one location to any empty location. If you attempt to move the contents of a location which contains only a num- ber (i.e. the name part is empty), the number will be copied, rather than moved.
23