NOTE: Duplicate names are not allowed (i.e. you may store any particular name in only one memory location). If you attempt to store a name which is already stored in another memory location (e.g. move it) the message MOVE NAME? will remind you that the name already exists. If you accept this, and store the contents in the new location, the original name and number will be erased.
To move a name and number (e.g. from location 14 to 25):
APress RCL 14 (or, alternatively, you may press ABC to select alpha mode, enter the name stored in location 14, and press RCL).
BPress STO 25. If location 25 is empty, MOVE NAME? will be displayed (if it is occupied, LOCATION FULL will be displayed; in this instance choose another location, e.g. press STO 26 to store in location 26).
CPress STO to move both name and number. The message STORED will be displayed.
If you are ‘moving’ only a number (i.e. the name part is empty) to an occupied location, the message REPLACE CONTENT? will be displayed; press STO to overwrite the contents, and copy the number.
RECALLING INFORMATION BY MEMORY LOCATION NUMBER
AEnter a memory location number then press RCL (e.g. for location 1 press 1 RCL, or for location 12 press 12 RCL).
The phone number stored in that memory location will be displayed. If the memory location is empty, the message EMPTY will appear.
BTo check the name stored in the same memory location, press ABC. If no name was stored with the number, the message NAME? will be dis- played. To return to the number, press ABC again.
CTo call the number in the memory location, with either the number or the name displayed, press SEND.
24