BASIC FUNCTIONS
RECEIVING A CALL
APress any key except ON or the volume keys.
An incoming call is indicated by a ringing tone, and the CALL message flashing on the display.
If the SILENT SERVICE option (Menu 6) has been selected there will be no ringing tone; the keypad and display lights will flash instead, and only a short beep will be heard (refer to ‘Ringing volume (Menu 6)’, page 37).
If you do not answer a call, the CALL message will remain on the display (indicating a missed call); to clear the display, press any key.
BTo end the call, press END.
MAKING A CALL
A For best reception, pull the antenna up to extend fully. Do not leave the antenna partly extended.
B Open the keypad cover. Enter the number you wish to dial. Remember to include the area code (if this is necessary on your system) even if you are making a local call. The number will
be displayed.
CTo correct a mistake, press CLR to delete the last digit, or press and hold CLR to clear the whole display (then
DPress SEND. The IN USE indicator will appear on the display, and the number will disappear when the call is connected.
ETo end the call, press END.
11