If you do not make a selection, the phone uses the default network setting, which is always active when you switch on your phone. Check with your network operator to find out the network default.
Menu 6 7, Network Feature Setting
Call Forwarding, Call Waiting, Selective Call Acceptance, and Send Own Number are services available through your network operator or dealer. When you subscribe to any of these services, your operator or dealer gives you a separate code that you use to activate and deactivate each service.
Menu 6 7 lets you store all the codes you use in your phone. Once you store the code in your phone, the service appears as a menu item. You can then use the menu to activate and deactivate CALL FORWARD, CALL WAITING, SELECTIVE CALL ACCEPTANCE, and SEND OWN NUMBER.
To remove an item from the menu, go through the steps shown in “To Store Codes”, but simply press left
F(OK) after the Feature code: prompt (without entering a code).
To store codes:
’Left F(Menu) 6 7 at Feature Code: enter
the code you want to store in your phone (e.g. *74) then left
F(OK)
▼to the service that
the code applies to, then left F(OK)
▼to suboption (as
applicable) then left F(OK)
▼to Activate or
Cancel’
left F(OK)
42