9. Touch Tones
Your phone is a “Touch Tone” phone, meaning that it creates certain sounds when you press the keys. These sounds can be used for many automated, over-
Touch Tones are called “DTMF” (Dual Tone Multifrequency) tones in the phone.
Sending Individual Touch Tones
Press keys during call.
Touch Tones can be used only when a call is active. You would use the Individual Touch Tone feature when, for example, you are prompted to “press 1 and then the star (*) button”. You would simply press 1 *.
Note: Individual Touch Tones can be sent only if Menu 4 3 is not set to Off. Menu 4 3 is described in this section.
Sending Strings of Touch Tones
During a call, with the display empty:
Recall from memory the string you want to send’
left F(Menu) then U
You can transmit Touch Tones one by one by pressing the keypad during a call. Additionally, you can store a whole digit sequence in a memory location and send it as Touch Tones. You could use this for
The phone sends (as Touch Tones) the digits that are currently on the display. You may also press and hold left F(Menu) then press ▼ to Send DTMF then left F (OK) then left F(Quit) to send a string of Touch Tones.
To store a Touch Tone string
Store Touch Tone strings the same way as you store phone numbers.
27