Nokia 2160i owner manual Touch Tone Settings in the Phone, Menu 4 3, Manual Dtmf Tones

∗∗creates a “+” (link to another memory location). When

you recall this number sequence from memory and press í, the phone dials the phone number, then displays

digits stored in the memory location you have entered. Press left ñ(DTMF) to send them.

Entering only a “+” at the end of a stored number causes the phone to prompt you for a memory location after the call is connected. The phone expects a memory location after the “+” character. Enter a location number and press left ñ(OK). Then press left ñ(DTMF) when the phone displays the digits stored in that memory location.

Touch Tone Settings in the Phone

Your phone’s Touch Tone settings are Menu 4 3, Manual DTMF Tones, and Menu 4 4, Auto DTMF Length.

Menu 4 3, Manual DTMF Tones

1)Press left ñ(Menu) 4 3.

2)Press W to your choice.

3)Press left ñ(OK).

This determines the length of the individual Touch Tones when you press keys during calls. Note that regardless of this setting, strings of Touch Tones can be sent.

Continuous means the tone sounds for as long as you hold the key. Fixed sets the tone length to 100 ms, regardless of how long you press the key. Off turns the tones off, meaning that no tones are sent when you press individual keys.

Menu 4 4, Auto DTMF Length

1)Left ñ(Menu) 4 4.

2)Press W to your choice.

3)Press left ñ(OK).

This determines the length of Touch Tones in strings. Short sets the DTMF tone length to 100 ms. Long sets the DTMF tone length to 500 ms.

28