Philips CTX503WHT/00 manual Mode settings, Set clock, Press ,Select to confirm

damage the battery. The only way to turn off the charger is to unplug it, so it is advisable to use an easily accessible power socket.

If you do not intend to use your phone for several days, we recommend that you remove the battery.

You can use the phone while it is charging. If the battery is completely flat, the battery symbol will only reappear after a few minutes of charging.

Mode settings

Once you switch on the phone, you need to set

Mode settings.

1.Check the Slot 1 and Slot 2 for the SIM cards (see Step 3 in "Inserting the SIM card").

2.Check that your phone is switched on. Long press ) if necessary. Enter the PIN

code if required. A PIN code is a 4- to 8- digit secret code of your SIM card. It is

preconfigured and communicated to you by your network or retailer.

If you enter an incorrect PIN code three times in succession, your SIM card will be blocked. To unblock it, you must request the PUK code from your operator.

3.The Mode settings screen displays. Press + or -to select:

Dual SIM open: Set SIM1 and SIM2 to idle mode.

Only SIM1 open: Only use SIM1 to make/ receive calls and send/receive messages. Only SIM2 open: Only use SIM2 to make/ receive calls and send/receive messages.

4.Press ,Select to confirm.

Set clock

1.Check that your phone is switched on.

2.On idle screen, press ,Menu and go to Settings > General >Time and date.

Set format: Select the time (12-hour or 24-

12 Getting Started